Heat & Cool Efficiently: Part III
Install a programmable
thermostat
A programmable
thermostat is ideal
for people who are away from home during set periods of time throughout the
week. Through proper use of pre-programmed settings, a programmable thermostat
can save you about $180 every year in energy costs.
Seal your heating and
cooling ducts
Ducts that move air to-and-from a forced air
furnace, central air conditioner, or heat pump are often big energy wasters. Sealing
and insulating ducts can
improve the efficiency of your heating and cooling system by as much as 20
percent — and sometimes much more.
Focus first on sealing ducts that run through
the attic, crawlspace, unheated basement, or garage. Use duct sealant (mastic)
or metal-backed (foil) tape to seal the seams and connections of ducts. After
sealing the ducts in those spaces, wrap them in insulation to keep them from
getting hot in the summer or cold in the winter. Next, look to seal any other
ducts that you can access in the heated or cooled part of the house.
Consider installing
ENERGY STAR qualified heating and cooling equipment
If your HVAC equipment is more than 10 years
old or not keeping your house comfortable, have it evaluated by a professional
HVAC contractor. If it is not performing efficiently or needs upgrading, consider
replacing it with a
unit that has earned the ENERGY STAR. Depending on where you live, replacing
your old heating and cooling equipment with ENERGY STAR qualified equipment can
cut your annual energy bill by nearly $200. But before you invest in a new HVAC
system, make sure that you have addressed the big air leaks in your house and
the duct system. Sometimes, these are the real sources of problems rather than
your HVAC equipment.
Ask about Proper
Installation of your new equipment
Replacing your old heating and cooling
equipment with new, energy-efficient models is a great start. But to make sure
that you get the best performance, the new equipment must be properly
installed. In fact, improper installation can reduce system efficiency by up to
30 percent — costing you more on your utility bills and possibly shortening the
equipment's life.
No comments:
Post a Comment